Managing traffic on busy urban corridors is one of the most persistent challenges cities face today. When traffic signals operate on fixed schedules, they cannot adapt to the unpredictable nature of real-world traffic-rush hour surges, special events, accidents, and weather changes all create conditions that static timing simply cannot accommodate. Burnside Road in Gresham, Oregon, experienced this firsthand before becoming a successful case study in how adaptive signal technology can transform urban mobility.
Table of Contents
Understanding Burnside Road corridor
Burnside Road is a five-lane major arterial that carries approximately 38,000 vehicles daily, making it one of the most critical transportation links in Gresham, Oregon. The corridor connects major highways and serves as a vital route for both commuters and freight traffic moving through the region. Like many urban arterials across the United States, Burnside Road struggled with increasing congestion as traffic volumes grew while signal infrastructure remained largely unchanged.
Prior to 2007, the corridor operated with time-of-day coordinated signal plans-pre-programmed schedules designed to optimize traffic flow during specific periods. While this represented an improvement over completely uncoordinated signals, these fixed plans degraded in effectiveness as traffic patterns shifted. Traditional signal timing plans do not accommodate variable and unpredictable traffic demands, producing frustrated drivers and degraded performance. The city recognized that a more intelligent, responsive approach was needed.
What is SCATS?
The Sydney Coordinated Adaptive Traffic System (SCATS) is an intelligent transportation platform for monitoring, controlling, and optimizing the movement of people and goods through real-time traffic signal operation. Developed by the New South Wales Department of Main Roads in Australia in 1975, SCATS has grown to become one of the most widely deployed adaptive signal systems globally.
Today, SCATS is installed at more than 63,000 intersections across 216 cities in 32 countries. The system represents a fundamental shift from reactive to proactive traffic management-instead of following predetermined schedules, it continuously analyzes real-time conditions and adjusts signal timing accordingly.
How the system operates
SCATS functions through a sophisticated network of vehicle detectors positioned at each intersection. These detectors-typically inductive loop sensors embedded in the pavement-continuously monitor approaching vehicles and measure traffic flow characteristics. When a vehicle passes over these loops, the detector registers its presence, speed, and movement through the intersection.
This traffic data flows from each intersection’s local controller to a central server. The SCATS architecture operates at two levels: LOCAL controllers at the roadside and MASTER computers that provide area-based traffic control. The central system processes information from the entire network, calculating optimal cycle times, phase splits, and offsets for each intersection while coordinating them across the corridor.
What makes SCATS particularly effective is its real-time responsiveness. The system automatically selects timing plans from a library based on current detector readings, modifying signal phases in small increments almost on a cycle-by-cycle basis. This contrasts sharply with traditional approaches where timing adjustments might occur only every few years.
Project goals for Burnside Road
When Gresham city officials decided to implement SCATS on the Burnside corridor, they established specific, measurable objectives to evaluate the system’s performance:
Travel time reduction: The primary goal was achieving a minimum 10% reduction in corridor travel times compared to the previous time-of-day coordinated plans.
Delay minimization: Overall corridor delay was targeted for at least a 5% decrease, reducing the time vehicles spend waiting at signals.
System stops: A 5% reduction in the total number of stops throughout the corridor would improve traffic flow and reduce fuel consumption.
Operational reliability: The city sought a user-friendly, reliable adaptive system that could respond dynamically to changing conditions without requiring constant manual intervention.
These objectives aligned with broader findings about adaptive signal benefits. According to the Federal Highway Administration, adaptive systems typically improve travel time by more than 10%, with improvements reaching 50% or more in areas with particularly outdated timing.
Performance evaluation and results
Following SCATS implementation in 2007, an independent review performed by Portland State University found that travel times along the Burnside corridor were reduced by at least 10% compared to the optimized signal coordination that was in place previously.
This achievement is particularly significant because the comparison was made against an already-optimized time-of-day system, not against completely uncoordinated signals. The fact that adaptive control could still deliver measurable improvements over conventional optimization demonstrates the inherent limitations of static timing plans.
Why static plans degrade over time
The evaluation revealed an important dynamic: traditional time-of-day plans showed consistent degradation as traffic volumes changed throughout the day and across seasons. Plans optimized for morning peak conditions became progressively less effective as actual traffic patterns diverged from the assumptions built into the timing.
SCATS, by contrast, maintained efficiency regardless of these fluctuations. The system’s ability to sense current conditions and adjust in real time meant that performance remained stable even as external factors changed. After SCATS deployment, travel times on Burnside Road dropped to their lowest recorded levels, effectively mitigating the increasing delays that had been observed under previous static plans.
Economic and environmental benefits
The improvements measured on Burnside Road translate into tangible benefits for drivers, businesses, and the environment. Outdated traffic signal timing accounts for more than 10% of all traffic delay on major routes, costing consumers time and fuel while reducing business productivity.
When vehicles spend less time idling at intersections, fuel consumption drops and emissions decrease. Smoother traffic flow means fewer stop-and-go movements, which are among the most fuel-intensive driving patterns. Studies across various adaptive signal implementations consistently show significant reductions in both fuel consumption and CO₂ emissions compared to fixed-timing alternatives.
For the City of Gresham, reduced congestion also means lower infrastructure costs in the long term. Instead of building additional lanes or constructing new roadways-expensive capital projects with significant environmental impacts-adaptive signal technology extracts more capacity from existing infrastructure.
Lessons for other cities
The Burnside Road case offers several insights for municipalities considering adaptive signal deployment:
Set measurable goals: Gresham established clear, quantifiable objectives before implementation. This allowed for rigorous before-and-after evaluation and demonstrated accountability to the public.
Compare against optimized baselines: By measuring improvements against already-coordinated timing rather than completely unmanaged signals, the city generated more credible evidence of adaptive technology’s value.
Consider corridor-level benefits: SCATS optimizes the entire network, not just individual intersections. This holistic approach produces better results than independently optimizing each signal location.
Plan for ongoing operation: Adaptive systems require proper detection infrastructure and ongoing maintenance. The technology investment includes not just software and central computers but also quality vehicle sensors at each intersection.
The future of adaptive signal control
Since Gresham’s successful implementation, adaptive signal technology has continued evolving. Modern systems increasingly incorporate data from connected vehicles, crowdsourced traffic apps, and advanced sensors capable of detecting not just cars but also bicycles and pedestrians. Unlike traditionally timed signals, adaptive systems can react to changing conditions caused by crashes, special events, and construction in real time.
Research continues to validate the benefits. Some corridors have achieved travel time reductions of up to 40% with adaptive technology, while also seeing meaningful crash reductions at equipped intersections.
For cities struggling with congestion but lacking resources for major highway expansion, adaptive signal control represents a cost-effective alternative. The Burnside Road project demonstrated that smart technology, properly implemented, can deliver measurable improvements to everyday driving conditions while supporting broader goals around sustainability and urban livability.
What do you think? As cities worldwide adopt smart traffic systems, how should communities balance the initial investment costs against long-term benefits? And with emerging technologies like connected vehicles, what new opportunities might arise for even more responsive traffic management?
References
- https://www.fhwa.dot.gov/innovation/everydaycounts/edc-1/asct.cfm
- https://en.wikipedia.org/wiki/Sydney_Coordinated_Adaptive_Traffic_System
- https://scats.nsw.gov.au/organisation/about-us
- https://www.greshamoregon.gov/globalassets/city-departments/urban-design-and-planning/transportation-planning/transportation-system-plan/transportation-system-plan-chapter-2.pdf?id=1913
- https://miovision.com/blog/adaptive-traffic-signals-reduce-congestion/
- https://www.nature.com/articles/s41467-025-56701-4
- https://www.maricopa.gov/4553/Adaptive-Signals
- https://goroveslade.com/smarter-signals-for-smoother-streets-how-adaptive-signal-control-technologies-asct-are-reshaping-urban-mobility/
Leave a Reply