Every city generates wastewater-a mix of domestic sewage and industrial effluents that, if left untreated, poses serious risks to public health and the environment. Sewage treatment systems form the backbone of urban sanitation infrastructure, but what exactly are these systems designed to achieve? And which regulations govern their operation in India? Understanding the core objectives and regulatory framework is essential for anyone involved in smart city planning or water sustainability.

Table of Contents

The core objective: protecting health and environment

The principal objective of wastewater treatment is to allow human and industrial effluents to be disposed of without endangering human health or causing unacceptable environmental damage. According to the Food and Agriculture Organization (FAO), the most appropriate treatment is one that produces an effluent meeting recommended microbiological and chemical quality guidelines at low cost with minimal operational requirements.

In developing countries, this principle takes on added significance. Rather than relying on advanced, complex treatment processes, planners often prioritize low-cost, low-maintenance systems that communities can sustain long-term. The FAO emphasizes that in many locations, it is better to design a reuse system accepting lower-grade effluent than to depend on advanced processes that may fail to consistently meet stringent standards. This pragmatic approach acknowledges ground realities-limited technical expertise, constrained budgets, and the difficulty of maintaining sophisticated equipment in resource-limited settings.

Addressing pathogen removal for agricultural reuse

Traditional sewage treatment plant design has historically focused on reducing biochemical oxygen demand (BOD) and suspended solids-the parameters that cause river pollution and oxygen depletion in water bodies. However, when treated effluent is intended for agricultural reuse, the priorities shift dramatically.

Pathogen removal becomes the primary concern for agricultural effluent reuse. The Applied Water Science journal notes that while treated sewage offers an important alternative water source for irrigation, concerns center on the transfer of pathogenic microorganisms to humans directly or indirectly through consumption of effluent-irrigated vegetables.

Selecting appropriate treatment processes

Meeting microbiological quality guidelines for safe water recycling requires careful process selection. The World Health Organization has developed guidelines advocating a ‘multiple-barrier’ approach to wastewater use, where farmers adopt various risk-reducing behaviors-such as ceasing irrigation before harvest to allow pathogens to die off in sunlight, applying water carefully to avoid contaminating leaves consumed raw, and cleaning vegetables with disinfectant.

Natural treatment systems like waste stabilization ponds have proven particularly effective for pathogen removal in developing countries. Research indicates that pond systems with overall retention of 20 days or more can produce effluent totally free of protozoan cysts and helminth ova. These systems offer lower operational complexity while achieving reliable pathogen reduction-a significant advantage for agricultural reuse applications.

Managing flow variability: peaks, storage, and equalization

Wastewater doesn’t arrive at treatment plants in steady, predictable flows. Instead, it follows a diurnal pattern-flow is typically low during early morning hours when water consumption is minimal, rising to a first peak in late morning when wastewater from peak morning water use reaches the plant, with a second peak usually occurring in the evening.

Peak-to-average flow ratios

The relationship between peak flows and average flows varies significantly based on community size. Small communities with compact sewer systems experience much higher peak-to-average flow ratios than larger cities. This happens because wastewater in smaller systems travels shorter distances and arrives at treatment plants more quickly, creating sharper flow spikes. In large urban areas, the extensive sewer network acts as a natural buffer, attenuating peaks as wastewater travels longer distances.

Flow equalization addresses this variability by dampening flow fluctuations and maintaining constant or nearly constant flow for treatment processes. Equalization tanks buffer flows with variations due to diurnal patterns and weather events, storing excess water during peak periods and releasing it gradually during low-flow periods. This approach stabilizes operations, improves treatment efficiency, and protects sensitive biological processes from shock loads.

Storage requirements for irrigation

The daily variations in flow from municipal treatment plants make it impracticable in most cases to irrigate directly from the treatment facility. Some form of flow equalization or short-term storage of treated effluent is necessary to provide a relatively constant supply of reclaimed water for efficient irrigation. Storage serves multiple purposes: equalizing daily flow variations, meeting peak irrigation demands exceeding average wastewater flow, minimizing effects of operational disruptions, and providing additional treatment time as oxygen demand, suspended solids, and microorganisms are further reduced during storage.

Short, medium, and long-term system objectives

Effective sewage system planning operates across three distinct timeframes, each with its own priorities and targets:

Short-term objectives (up to 5 years) typically focus on interim on-site systems that address immediate sanitation needs. These might include septic tanks, pit latrines with proper treatment, or small-scale decentralized solutions that can be implemented quickly while longer-term infrastructure is planned and constructed.

Medium-term objectives (approximately 15 years) shift toward decentralized collection systems designed to prevent environmental discharge of untreated sewage. This phase often involves constructing local collection networks and community-level treatment facilities that can serve neighborhoods while larger centralized systems are developed.

Long-term objectives (30 years and beyond) encompass conventional, environmentally sound collection, treatment, and reuse infrastructure. This includes comprehensive sewer networks, centralized treatment plants meeting stringent discharge standards, and integrated systems for beneficial reuse of treated effluent in agriculture, industry, or groundwater recharge.

Essential legislation: Water Act, EPA, and municipal byelaws

India’s sewage treatment systems operate within a comprehensive regulatory framework established through central legislation and implemented by state and local authorities.

The Water (Prevention and Control of Pollution) Act, 1974

The Water (Prevention and Control of Pollution) Act, 1974 represents India’s foundational legislation for water pollution control. The Act established the Central Pollution Control Board (CPCB) and State Pollution Control Boards (SPCBs) as implementing authorities. Under Section 25, no person is permitted to establish any industry, start new operations, or process sewage treatment without obtaining prior consent from the State Board.

The Act requires two critical approvals: Consent to Establish (CTE) before setting up any facility that may discharge sewage or trade effluents, and Consent to Operate (CTO) for ongoing operations. State Boards have authority to lay down, modify, or annul effluent standards for sewage and trade effluents. They also classify waters within the state and evolve economical methods of treatment having regard to local conditions.

The Environment (Protection) Act, 1986

Following the Bhopal Gas Tragedy in 1984, Parliament enacted the Environment (Protection) Act, 1986 to provide umbrella legislation covering gaps in existing environmental laws. Under this Act, no person carrying on any industry, operation, or process shall discharge any environmental pollutant in excess of prescribed standards.

The Environment Protection Rules specify binding discharge and emission standards through detailed schedules. For sewage treatment, Schedule VI establishes general standards for discharge of environmental pollutants. Key parameters include BOD limits of 30 mg/l for discharge into inland surface waters and 100 mg/l for discharge on land for irrigation, suspended solids limits of 100 mg/l and 200 mg/l respectively, and pH ranges between 5.5 and 9.0.

Municipal byelaws and local regulations

Beyond central legislation, municipal byelaws mandate proper sewage disposal at the local level. These regulations typically require property owners to connect to municipal sewers where available, prohibit discharge of untreated sewage into drains or water bodies, and specify standards for on-site systems where centralized sewerage isn’t available. Municipal authorities enforce these byelaws through building permits, occupancy certificates, and regular inspections.

The interplay between central standards and state implementation creates a layered regulatory environment. While the Water Act vested power in SPCBs to set effluent standards for intra-state streams, and the EPA empowered the central government to notify standards, the practical application often depends on state-level enforcement capacity and local governance structures.

Compliance and enforcement mechanisms

The regulatory framework includes multiple enforcement tools. Pollution Control Boards conduct inspections of sewage treatment works and review plans for treatment facilities. They collect and analyze samples from streams, wells, and effluent discharges. Violations can result in penalties, prosecution, or orders requiring remedial measures including modifications to existing treatment systems.

Recent amendments, including the Water (Prevention and Control of Pollution) Amendment Bill, 2024, have moved toward decriminalizing certain violations while imposing higher monetary penalties ranging from Rs 10,000 to Rs 15 lakh. This shift aims to encourage compliance through economic incentives rather than purely punitive measures.

What do you think? As cities grow and water scarcity intensifies, how should sewage treatment priorities balance between protecting public health, enabling agricultural reuse, and managing costs in resource-constrained settings? What role should smart technologies play in optimizing treatment systems while maintaining affordability?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://www.fao.org/4/t0551e/t0551e05.htm
  2. https://link.springer.com/article/10.1007/s13201-018-0698-6
  3. https://www.waterandwastewater.com/flow-equalization-in-wastewater-treatment/
  4. https://cpcb.nic.in/water-pollution/
  5. https://cpcb.nic.in/env-protection-act/
  6. https://indiankanoon.org/doc/85953455/
  7. https://www.indiawaterportal.org/water-quality-and-pollution/pollution/indias-efforts-water-pollution-control-legislative-frameworks-and-real-world-impacts
  8. https://prsindia.org/billtrack/the-water-prevention-and-control-of-pollution-bill-2024

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Smart Cities – Safe Water, Sanitation and Sustainability

1 Clean and Safe Drinking Water

  1. Introduction
  2. Unequal Access
  3. Save and Replenish Water
  4. Look for New Water Resources
  5. Redistribute
  6. Reduce Demand
  7. Recycle
  8. Need for Safe Drinking Water
  9. Clean Drinking Water for Smart Cities
  10. Major Issues in Smart City Water Supply
  11. Water Quality Standards for Clean and Safe Drinking Water
  12. Sources for Clean Water

2 Water Management for Smart Cities

  1. Introduction
  2. Water Supply Security
  3. Vulnerability Assessment and Emergency Response Planning
  4. Smart Solutions for Water Management in Smart Cities
  5. Industrial Leadership Collaborations for Secure Water Future

3 Smart Monitoring of Water Supply in Smart Cities

  1. Water Monitoring and Auditing
  2. Scada in Water Management
  3. Water Smart Metering / Billing
  4. Water ATM’s, 24×7 Water Supply System
  5. Water Supply for Emergencies

4 Water Treatment for Smart Cities

  1. Objectives of Treating the Water
  2. Classification of Treatment Units
  3. Advanced Water Treatment Options

5 Physical Infrastructure for Sewerage Systems

  1. Need for Infrastructure for Sewerage Systems
  2. Different Types of Sewerage Systems
  3. Collection and Transportation

6 Sources and Flow Rates of Sewage

  1. Water Demand and Sewerage Flow
  2. Sewerage Flow and Variation
  3. Sewerage Characteristics
  4. Facility Planning for Sewerage Systems
  5. Sewage Treatment Objectives and Regulations
  6. Wastewater Facility Planning, Design and Management
  7. Engineering and Environmental Considerations

7 Design Considerations for Sewerage Systems

  1. Sewage Treatment Objectives and Regulations
  2. Wastewater Facility Planning, Design and Management
  3. Engineering and Environmental Considerations

8 Waste Water Treatment

  1. Preliminary and Primary Treatments
  2. Biological Treatment
  3. Industrial Wastewater Treatment
  4. Advanced Wastewater Treatment
  5. Circular Economy in Wastewater Treatment Plants

9 Solid Waste Management in Smart Cities

  1. Need for Solid Waste Management
  2. Waste Characterization
  3. Waste Generation
  4. Municipal Solid Waste Management (MSWM): Functional System
  5. Categories of Problems Common to Waste Management in Smart Cities
  6. Role of the Municipalities
  7. Role of Rag Pickers in MSWM

10 Physical Infrastructure for Solid Waste Management

  1. Waste Storage
  2. Collection of Municipal Solid Waste
  3. Transfer of Solid Waste
  4. Transportation of Solid Waste
  5. Processing the Solid Waste
  6. Composting
  7. Biomethanation
  8. Thermal Processing of Municipal Solid Waste
  9. Reuse and Recycling

11 Solid Waste Management and Waste to Energy

  1. Integrated Solid Waste Management (ISWM)
  2. Concept of Circular Economy in Waste Management(CCEWM)
  3. Biological Conversion Technologies
  4. Chemical Technologies
  5. Advanced Treatment Methods
  6. Waste to Fuels
  7. Waste to Bio Energy
  8. Waste to Bio-Hydrogen
  9. Waste to Value Added Products

12 Engineering Disposal

  1. Introduction
  2. Dumping and Landfill
  3. Site Selection
  4. Design and Operation of Landfill
  5. Leachate Management

13 Value Added Products

  1. Introduction
  2. Conventional Value Added Products
  3. Problems Associated with Conventional Value Added Products
  4. Emerging Value Added Products
  5. Economic Considerations of Vaps

14 Various Emerging Value-Added Products

  1. Construction Materials
  2. Fuels
  3. Electricity
  4. Animal Feed

15 Value-Added Products from Organic Residues

  1. Bio-diesel
  2. Bioflocculants
  3. Bioethanol
  4. Volatile Fatty Acids (VFAS)
  5. Biofertilizers
  6. Enzymes