Access to clean and safe drinking water is a fundamental human right recognized by the United Nations. Yet, in India, the reality remains deeply concerning. Natural water resources that sustain life have become dangerously contaminated due to rapid industrialization, agricultural runoff, and inadequate waste management. The gap between water safety standards and actual water quality at the tap poses significant public health challenges that require urgent attention and systemic solutions.

Table of Contents

The right to safe water and current realities

According to reports by the National Statistical Office (NSO), approximately two-thirds of Indian households consume unsafe and untreated water. This alarming statistic reveals the extent of the water quality crisis facing the nation. Even more concerning is that only about 8% of households boil water before drinking-a practice that, while helpful, is insufficient for eliminating many chemical contaminants and dissolved impurities.

The global framework for addressing this crisis comes through the United Nations Sustainable Development Goal 6, which aims to ensure availability and sustainable management of water and sanitation for all by 2030. Target 6.1 specifically mandates achieving universal and equitable access to safe and affordable drinking water for all. India has committed to these goals, but significant challenges remain.

According to UNICEF India, waterborne diseases have an economic burden of approximately USD 600 million annually in the country. Two-thirds of India’s 718 districts are affected by extreme water depletion, and the fast rate of groundwater depletion presents a major challenge since groundwater supplies 85% of drinking water in rural areas and 48% in urban areas.

The Jal Jeevan Mission, launched by the Government of India in August 2019, represents a significant national commitment to provide piped water supply to every household. Between August 2019 and May 2022, coverage of functional household tap connections in rural areas increased from 17% to over 49%. However, providing piped connections is only part of the solution-ensuring the water flowing through these pipes meets safety standards is equally critical.

BIS standards and the uniform protocol

The Bureau of Indian Standards (BIS) sets the national drinking water quality standards through IS 10500:2012. This standard was originally published in 1983 and underwent its second revision in 2012 to align with internationally available specifications for drinking water. The revision drew from WHO Guidelines for Drinking Water Quality, EU Directives on water quality for human consumption, and the USEPA National Primary Drinking Water Standard.

Acceptable and permissible limits

The BIS standards define two categories of limits for various parameters. Acceptable limits represent safe concentrations of substances in water, beyond which it may not taste or appear appealing. Permissible limits represent concentrations that are safe for consumption when no alternative source of water is available. The IS 10500:2012 standard covers multiple categories of parameters including organoleptic and physical characteristics such as colour, odour, taste, and turbidity, along with chemical requirements including pH, total dissolved solids, hardness, chloride, sulphate, and numerous heavy metals. The standard also addresses toxic substances like arsenic, lead, cadmium, and mercury, as well as bacteriological requirements.

Key parameters and their limits under BIS standards include total dissolved solids with a maximum permissible value of 2000 mg/l, pH between 6.5 and 8.5, total hardness at 600 mg/l, arsenic at 0.05 mg/l, fluoride at 1.5 mg/l, iron at 0.3 mg/l, and nitrate at 45 mg/l. For bacteriological safety, E. coli must be completely absent in drinking water samples.

The uniform protocol for water quality monitoring

Beyond the BIS specifications, the Ministry of Water Resources, Government of India introduced the Uniform Protocol for Water Quality Monitoring in 2005. This protocol was developed under the powers conferred by Section 3 of the Environment (Protection) Act, 1986, and addresses the growing risk of geogenic and anthropogenic contamination.

Geogenic contamination refers to naturally occurring pollutants that enter water from geological sources, such as arsenic and fluoride from underground rock formations. Anthropogenic contamination originates from human activities including industrial discharge, agricultural runoff, and improper sewage disposal. The protocol provides specific requirements for monitoring drinking water quality with a view to ensure provision of safe drinking water to consumers.

The Ministry of Drinking Water and Sanitation subsequently constituted an Expert Group to prepare a Uniform Drinking Water Quality Monitoring Protocol. This protocol serves as a guidance system on aspects like minimum infrastructure required for building space, manpower, instrumentation, sampling procedures, and testing protocols. It also includes guidelines for setting up laboratories at state, district, and sub-district levels for regular testing and surveillance of drinking water sources.

Alarming water quality test results

In November 2019, the Bureau of Indian Standards released a comprehensive water quality report for state capitals that revealed troubling findings. The study was conducted in line with the Jal Jeevan Mission’s objective of providing tap water to all households. The results showed a vast majority of samples failed to comply with the requirements of IS 10500:2012 in one or more parameters.

Delhi at the bottom, Mumbai at the top

The findings placed Delhi at the bottom of the rankings. All 11 samples drawn from various locations across the national capital failed to comply with Indian Standard requirements, failing on 19 different parameters. Tests covered organoleptic and physical parameters, chemical composition, toxic substances, and bacteriological quality. In stark contrast, Mumbai emerged as the only city where all 10 samples of tap water met every parameter under IS 10500:2012.

Cities like Hyderabad, Bhubaneswar, Ranchi, Raipur, Amravati, and Shimla showed mixed results, with one or more samples failing to comply with the standards. However, none of the samples drawn from 13 state capitals-Chandigarh, Thiruvananthapuram, Patna, Bhopal, Guwahati, Bengaluru, Gandhinagar, Lucknow, Jammu, Jaipur, Dehradun, Chennai, and Kolkata-complied with the requirements of the Indian Standard.

What makes water unfit for drinking

According to BIS standards, water is defined as unfit for drinking if it is bacteriologically contaminated, meaning indicator bacteria such as E. coli or viruses are present, or if chemical contamination exceeds maximum permissible limits. Chemical parameters that commonly fail include excess fluoride above 1.5 mg/l, total dissolved solids above 2000 mg/l, iron above 0.3 mg/l, manganese above 0.3 mg/l, arsenic above 0.05 mg/l, and nitrates above 45 mg/l.

The sources of contamination are varied. Bacteriological contamination typically stems from sewage contamination with faecal matter, household wastewater, polluted stormwater, and agricultural runoff. Chemical contamination can arise from industrial discharges, agricultural practices using fertilizers and pesticides, improper waste disposal, and naturally occurring geological sources.

Reasons for the disparity

Several factors contribute to the wide disparity in water quality across cities. According to analysis by the Observer Research Foundation, Mumbai has made significant infrastructure improvements since 2012-13, including stopping the use of steel water pipes for surface distribution and channelling supply through underground concrete water tunnels. The city also replaced spaghetti networks of pipes in slums with standardized infrastructure.

Intermittent water supply poses another challenge. In many cities, water supply is not continuous, leading to pressure drops in pipes during non-supply periods. During these times, contaminated surrounding groundwater can seep into the pipes and flow out when supply resumes. The age of water infrastructure, sampling locations, and seasonal variations also affect test results.

The path forward

Addressing India’s drinking water quality challenges requires a multi-pronged approach. Making BIS standards mandatory for piped water supply, rather than just for packaged drinking water, would create accountability for public agencies. Strengthening water quality testing laboratories at all levels and ensuring regular monitoring are essential steps.

Investment in water treatment infrastructure, modernizing aging distribution networks, and moving towards continuous water supply systems can significantly reduce contamination risks. Public awareness about water purification methods and the importance of testing household water quality also plays a crucial role.

The government’s commitment to the Jal Jeevan Mission and SDG 6 targets provides a framework for progress. However, achieving safe drinking water for all by 2030 will require accelerated action, increased investment, and coordination across all levels of government and society.

What do you think? Given the significant disparities in water quality across Indian cities, what role should citizens play in monitoring and demanding safe drinking water? How can technology and community participation help bridge the gap between water quality standards and actual water reaching households?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://www.kent.co.in/blog/safe-drinking-water-guidelines-in-india/
  2. https://www.un.org/sustainabledevelopment/water-and-sanitation/
  3. https://www.unicef.org/india/what-we-do/clean-drinking-water
  4. https://www.bis.gov.in/other/DrinWatIS10500.pdf
  5. https://cwc.gov.in/water-quality-inforamtion
  6. https://pib.gov.in/newsite/PrintRelease.aspx?relid=194516
  7. https://scroll.in/latest/943964/mumbais-tap-water-best-in-the-country-delhis-worst-shows-centres-survey
  8. https://www.orfonline.org/expert-speak/quality-of-water-in-indias-state-capitals-58308

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Smart Cities – Safe Water, Sanitation and Sustainability

1 Clean and Safe Drinking Water

  1. Introduction
  2. Unequal Access
  3. Save and Replenish Water
  4. Look for New Water Resources
  5. Redistribute
  6. Reduce Demand
  7. Recycle
  8. Need for Safe Drinking Water
  9. Clean Drinking Water for Smart Cities
  10. Major Issues in Smart City Water Supply
  11. Water Quality Standards for Clean and Safe Drinking Water
  12. Sources for Clean Water

2 Water Management for Smart Cities

  1. Introduction
  2. Water Supply Security
  3. Vulnerability Assessment and Emergency Response Planning
  4. Smart Solutions for Water Management in Smart Cities
  5. Industrial Leadership Collaborations for Secure Water Future

3 Smart Monitoring of Water Supply in Smart Cities

  1. Water Monitoring and Auditing
  2. Scada in Water Management
  3. Water Smart Metering / Billing
  4. Water ATM’s, 24×7 Water Supply System
  5. Water Supply for Emergencies

4 Water Treatment for Smart Cities

  1. Objectives of Treating the Water
  2. Classification of Treatment Units
  3. Advanced Water Treatment Options

5 Physical Infrastructure for Sewerage Systems

  1. Need for Infrastructure for Sewerage Systems
  2. Different Types of Sewerage Systems
  3. Collection and Transportation

6 Sources and Flow Rates of Sewage

  1. Water Demand and Sewerage Flow
  2. Sewerage Flow and Variation
  3. Sewerage Characteristics
  4. Facility Planning for Sewerage Systems
  5. Sewage Treatment Objectives and Regulations
  6. Wastewater Facility Planning, Design and Management
  7. Engineering and Environmental Considerations

7 Design Considerations for Sewerage Systems

  1. Sewage Treatment Objectives and Regulations
  2. Wastewater Facility Planning, Design and Management
  3. Engineering and Environmental Considerations

8 Waste Water Treatment

  1. Preliminary and Primary Treatments
  2. Biological Treatment
  3. Industrial Wastewater Treatment
  4. Advanced Wastewater Treatment
  5. Circular Economy in Wastewater Treatment Plants

9 Solid Waste Management in Smart Cities

  1. Need for Solid Waste Management
  2. Waste Characterization
  3. Waste Generation
  4. Municipal Solid Waste Management (MSWM): Functional System
  5. Categories of Problems Common to Waste Management in Smart Cities
  6. Role of the Municipalities
  7. Role of Rag Pickers in MSWM

10 Physical Infrastructure for Solid Waste Management

  1. Waste Storage
  2. Collection of Municipal Solid Waste
  3. Transfer of Solid Waste
  4. Transportation of Solid Waste
  5. Processing the Solid Waste
  6. Composting
  7. Biomethanation
  8. Thermal Processing of Municipal Solid Waste
  9. Reuse and Recycling

11 Solid Waste Management and Waste to Energy

  1. Integrated Solid Waste Management (ISWM)
  2. Concept of Circular Economy in Waste Management(CCEWM)
  3. Biological Conversion Technologies
  4. Chemical Technologies
  5. Advanced Treatment Methods
  6. Waste to Fuels
  7. Waste to Bio Energy
  8. Waste to Bio-Hydrogen
  9. Waste to Value Added Products

12 Engineering Disposal

  1. Introduction
  2. Dumping and Landfill
  3. Site Selection
  4. Design and Operation of Landfill
  5. Leachate Management

13 Value Added Products

  1. Introduction
  2. Conventional Value Added Products
  3. Problems Associated with Conventional Value Added Products
  4. Emerging Value Added Products
  5. Economic Considerations of Vaps

14 Various Emerging Value-Added Products

  1. Construction Materials
  2. Fuels
  3. Electricity
  4. Animal Feed

15 Value-Added Products from Organic Residues

  1. Bio-diesel
  2. Bioflocculants
  3. Bioethanol
  4. Volatile Fatty Acids (VFAS)
  5. Biofertilizers
  6. Enzymes